Track Loaders
Track Loader, 10000# Takeuchi TL10V2 V
Manufacturer: Takeuchi
Model: TL10V2
Additional Information
- TL10V2 Compact Track Loader
- The TL10V2 features a vertical lift loader arrangement and is Final Tier 4 emissions compliant. The cab is completely redesigned and enlarged and features a low effort overhead door design for improved entry and egress. A quiet track design with wide block tread reduces vibration, noise levels, and improves ride quality.
- Product Details
- Features
- ENGINE:
- EPA Final Tier 4 Emission Compliant - Turbocharged - High Pressure Common Rail Injection System - DOC+DPF Exhaust After Treatment - Automatic Fuel Bleed System - Active Power Control Power Management System - Working Modes - Power and ECO - Dual Element Air Filter - High Capacity Radiator and Hydraulic Oil Cooler Mounted Side-by-Side on Swing Out Frame
- ELECTRICAL:
- 5.7" Color Multi-Informational Display with Rear Camera - Sealed Rocker Switches -
- 12 volt System with 60 amp Alternator - LED: Two Front and Two Rear - Engine Preheat - Hour Meter - Back-up Alarm - Horn
- UNDERCARRIAGE AND FRAME:
- Double Planetary Reduction Drives - Permanently Sealed Track Rollers with Metal Face Seals - Fully Welded Frame with Integrated Cross Members - 2 Speed Travel
- 15.7" Rubber Track - Grease Type Track Adjuster - Front and Rear Tie-Down Points and Lift Points - Rear Bumper Integrated into Frame
- OPERATOR'S STATION:
- Tilt-up Operator's Station - Deluxe High Back Suspension Seat - Rear View Camera - Foot Throttle - Dial Throttle Control - Rear Pivoting Lap Bar with Arm Rest - ROPS / FOPS Structure - Retractable 3" Seat Belt - Pressurized Cab with Roll-up Door, A/C, Heat, Defrost and Front Wiper, and AM / FM / MP3 Radio with
- HYDRAULIC & WORKING EQUIPMENT:
- Vertical Lift Design - Pilot Hydraulic Controls - Boom Float with Detent - Cushioned Boom Cylinders - Hydraulic Self Leveling - Proportional Auxiliary Hydraulic Controls with Detent - Pressure Relieving Flat Faced Coupler Body - 14-Pin Connector with Push Button Control - High Capacity Steel Hydraulic Tank - Mechanical Quick Coupler - Hydraulic Quick Coupler Cab - Standard Equipment
- Primary Flow Auxiliary Hydraulics 18.8 gpm
- Specifications:
- OPERATING PERFORMANCE
- Operating Weight - Canopy - 9,840 lb
- Operating Weight - Cab - 10,150 lb
- Tipping Load - 7,205 lb
- Rated Operating Capacity (ISO 14397-1)@35%* - 2,522 lb
- Operating Load at 50% of Tipping Load - 3,600 lb
- Bucket Breakout Force - 6,520 lb
- Lift Arm Breakout Force - 5,400 lb
- Traction Force - 9,730 lb
- Ground Pressure - Canopy - 4.9 psi
- Ground Pressure - Cab - 5.1 psi
- Travel Speed - Low 4.8 mph
- Travel Speed - High 7.0 mph
- *Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load.
- HYDRAULIC SYSTEM:
- Auxiliary Flow - Primary Circuit - 18.8 gpm
- Hydraulic System Pressure - 3,481 psi
- ENGINE:
- Make / Model - Kubota / V3307CR-TE4B
- Engine Displacement - 3.3 L
- Horsepower @ 2,600 rpm - 74.3 hp
- Maximum Torque @ 1,500 rpm - 195 ft-lb
- FLUID CAPACITIES:
- Engine Lubrication - 11.8 qt
- Cooling System - 15.9 qt
- Fuel Tank Capacity - 21.5 gal
- Fuel Consumption (65% of Full Load) - 2.7 gpm
- Hydraulic Reservoir Capacity - 9.5 gal
- Hydraulic System Capacity - 17.2 gal
- MACHINE DIMENSIONS:
- Max. Lift Height to Bucket Pin - 10' 4.8"
- Dump Height Fully Raised - 7' 11.9"
- Dump Reach Fully Raised - 3' 1.4"
- Dump Angle - 40
- Rollback Angle - 30
- Track Ground Contact Length - 4' 7.9"
- Machine Length - 9' 7.2"
- Transport Length - 12' 1.0"
- Transport Height - 7' 5.4"
- Departure Angle - 30
- Clearance Circle with Bucket - 7' 8.5"
- Clearance Circle without Bucket - 5'
- Clearance Circle Rear - 5' 5.2"
- Track Width - 15.7"
- Ground Clearance - 12.6"
- Overall Width without Bucket - 5' 8.5"
* Please call us with any questions about our track loader 10000 takeuchi tl10v2 v rentals in Los Angeles, Orange, San Bernardino, San Diego, and Riverside Counties, Santa Fe Springs, Sun Valley, or Corona California.