Track Loaders

Track Loader, 10000# Takeuchi TL10V2 V

Image for reference only
Actual item may look different
Click on image for larger view

Manufacturer: Takeuchi

Model: TL10V2

Additional Information

TL10V2 Compact Track Loader
The TL10V2 features a vertical lift loader arrangement and is Final Tier 4 emissions compliant. The cab is completely redesigned and enlarged and features a low effort overhead door design for improved entry and egress. A quiet track design with wide block tread reduces vibration, noise levels, and improves ride quality.
Product Details
Features
ENGINE:
EPA Final Tier 4 Emission Compliant - Turbocharged - High Pressure Common Rail Injection System - DOC+DPF Exhaust After Treatment - Automatic Fuel Bleed System - Active Power Control Power Management System - Working Modes - Power and ECO - Dual Element Air Filter - High Capacity Radiator and Hydraulic Oil Cooler Mounted Side-by-Side on Swing Out Frame
ELECTRICAL:
5.7" Color Multi-Informational Display with Rear Camera - Sealed Rocker Switches -
12 volt System with 60 amp Alternator - LED: Two Front and Two Rear - Engine Preheat - Hour Meter - Back-up Alarm - Horn
UNDERCARRIAGE AND FRAME:
Double Planetary Reduction Drives - Permanently Sealed Track Rollers with Metal Face Seals - Fully Welded Frame with Integrated Cross Members - 2 Speed Travel
15.7" Rubber Track - Grease Type Track Adjuster - Front and Rear Tie-Down Points and Lift Points - Rear Bumper Integrated into Frame
OPERATOR'S STATION:
Tilt-up Operator's Station - Deluxe High Back Suspension Seat - Rear View Camera - Foot Throttle - Dial Throttle Control - Rear Pivoting Lap Bar with Arm Rest - ROPS / FOPS Structure - Retractable 3" Seat Belt - Pressurized Cab with Roll-up Door, A/C, Heat, Defrost and Front Wiper, and AM / FM / MP3 Radio with
HYDRAULIC & WORKING EQUIPMENT:
Vertical Lift Design - Pilot Hydraulic Controls - Boom Float with Detent - Cushioned Boom Cylinders - Hydraulic Self Leveling - Proportional Auxiliary Hydraulic Controls with Detent - Pressure Relieving Flat Faced Coupler Body - 14-Pin Connector with Push Button Control - High Capacity Steel Hydraulic Tank - Mechanical Quick Coupler - Hydraulic Quick Coupler Cab - Standard Equipment
Primary Flow Auxiliary Hydraulics 18.8 gpm
Specifications:
OPERATING PERFORMANCE
Operating Weight - Canopy - 9,840 lb
Operating Weight - Cab - 10,150 lb
Tipping Load - 7,205 lb
Rated Operating Capacity (ISO 14397-1)@35%* - 2,522 lb
Operating Load at 50% of Tipping Load - 3,600 lb
Bucket Breakout Force - 6,520 lb
Lift Arm Breakout Force - 5,400 lb
Traction Force - 9,730 lb
Ground Pressure - Canopy - 4.9 psi
Ground Pressure - Cab - 5.1 psi
Travel Speed - Low 4.8 mph
Travel Speed - High 7.0 mph
*Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load.
HYDRAULIC SYSTEM:
Auxiliary Flow - Primary Circuit - 18.8 gpm
Hydraulic System Pressure - 3,481 psi
ENGINE:
Make / Model - Kubota / V3307CR-TE4B
Engine Displacement - 3.3 L
Horsepower @ 2,600 rpm - 74.3 hp
Maximum Torque @ 1,500 rpm - 195 ft-lb
FLUID CAPACITIES:
Engine Lubrication - 11.8 qt
Cooling System - 15.9 qt
Fuel Tank Capacity - 21.5 gal
Fuel Consumption (65% of Full Load) - 2.7 gpm
Hydraulic Reservoir Capacity - 9.5 gal
Hydraulic System Capacity - 17.2 gal
MACHINE DIMENSIONS:
Max. Lift Height to Bucket Pin - 10' 4.8"
Dump Height Fully Raised - 7' 11.9"
Dump Reach Fully Raised - 3' 1.4"
Dump Angle - 40
Rollback Angle - 30
Track Ground Contact Length - 4' 7.9"
Machine Length - 9' 7.2"
Transport Length - 12' 1.0"
Transport Height - 7' 5.4"
Departure Angle - 30
Clearance Circle with Bucket - 7' 8.5"
Clearance Circle without Bucket - 5'
Clearance Circle Rear - 5' 5.2"
Track Width - 15.7"
Ground Clearance - 12.6"
Overall Width without Bucket - 5' 8.5"

* Please call us with any questions about our track loader 10000 takeuchi tl10v2 v rentals in Los Angeles, Orange, San Bernardino, San Diego, and Riverside Counties, Santa Fe Springs, Sun Valley, or Corona California.