Metal Cutting
Plasma Cutter 5/8" cap. -110v or 230v
Manufacturer: Miller Electric
Model: Spectrum 625 X-Treme
Additional Information
- Spectrum 625 X-TREME
- Cutting Capability - Rated: 5/8
- X-TREME Versatility Auto-Line circuitry automatically connects to 120 240 VAC, single-phase power, 60 Hz, without making internal changes. (Output amperage is automatically reduced to 27 A for 120 V input.)
- X-TREME Protection X-CASE provides ultimate protection and additional space for MVP adapters, consumable box, gloves, and eye protection, etc.
- MVP adapters allow connection to 120 or 240 V receptacles without tools - choose the adapter cord with the right plug that fits the receptacle and connect it to the power cord with the L6-30R twist lock.
- LED indicators for power, pressure, cup and temperature allow faster troubleshooting, eliminating unnecessary downtime.
- Automatic air regulation compensates for input pressure variation to provide constant recommended torch pressure for optimum cutting performance.
- Automatic gouging consumable detection adjusts gas pressure to optimize performance, eliminating the need for a manual regulator.
- Input Power: Amps Input at Rated Output, 60 Hz, 1-Phase
- 240 V 27A - 40 A at 140 VDC, 50% Duty Cycle
- 120 V (20 A) 26A - 27 A at 91 VDC, 20% Duty Cycle
- 120 V (15 A) 18A - 20 A at 88 VDC, 35% Duty Cycle
- Mild Steel Cutting Capability:
- Cutting at 40 Amps (240 V) - Mild Steel Recommended Cut Speeds at 40 Amps
- Thickness Approximate Travel Speeds*
- 1/8 - 156 IPM
- - 64 IPM
- 3/8 - 36 IPM
- - 22 IPM
- 5/8 - 13 IPM
- Note: Recommended maximum piercing capacity for hand-held applications is 5/16 . Maximum sever cut of 7/8 at approximately 5 IPM.
- Cutting at 27 Amps (120 V)
- Output amperage is automatically reduced to 27 A for 120 V input. Mild Steel Recommended Cut Speeds at 27 Amps
- Thickness Approximate Travel Speeds*
- 12 ga. - 115 IPM
- 1/8 - 88 IPM
- 3/16 - 50 IPM
- - 28 IPM
- 3/8 - 15 IPM
- - 8 IPM
- 5/8 - 5 IPM
- Note: Recommended maximum piercing capacity for hand-held applications is 1/8 .
* Please call us with any questions about our plasma cutter 5/8 inch cap. 110v or 230v rentals in Los Angeles, Orange, San Bernardino, San Diego, and Riverside Counties, Santa Fe Springs, Sun Valley, or Corona California.