Submersible
Pump, Sub 3/4"
Manufacturer: DAYTON
Model: 3YU55
Additional Information
- MODEL - 3YU55
- DISCHARGE - 1 1/4" MNPT
- MOTOR OUTPUT - 1/4 hp
- VOLTAGE - 110V
- CABLE LENGTH - 10 ft.
- BODY DIAMETER - 6 in
- OVERALL HEIGHT 10 1/2 in
- HEAD - 22'
- Flow Rate @ 20 Ft. of Head - 5 gpm
- HP 1/4
- Voltage 115V
- Phase Single
- Frequency 60 Hz
- Run Amps 2.6A
- RPM 3450
- Motor Type PSC Oil Free
- Overload Protection Internal Thermal Overload
- Motor Shaft Material Stainless Steel
- Motor Housing Material Polypropylene
- Motor Duty Intermittent
- Motor End Bearing Single Row Ball
- Pump End Bearing Single Row Ball
- Lubrication Permanently Lubricated
- Discharge 1-1/4 Inch MNPT, Vertical
- Volute Material Polypropylene
- Base Material Polypropylene
- Impeller Type Open Vortex
- Impeller Material Polyamide
- Hardware Material Stainless Steel
- O-rings Buna-N
- Seal Type Single Mechanical
- Seal Materials Carbon/Ceramic/Buna-N
- Operation Manual Operation
- Power Cord 18/3 SJTOW, 10 (3m),
- NEMA 5-15P 120V Plug
- Max. Solids Handling 1/8 (3.2mm) spherical
- Max. Water Temperature 140 F (60 C)
- Designed Fluid Environment Water / Wastewater
* Please call us with any questions about our pump sub 3/4 inch rentals in Los Angeles, Orange, San Bernardino, San Diego, and Riverside Counties, Santa Fe Springs, Sun Valley, or Corona California.